TRAVELLING BAND SCREENS
SERIES:  B412 – THROUGH FLOW TRAVELLING BAND SCREEN
Through flow travelling band screen is a sturdy self-cleaning fine screen provided with endless band of perforated plates or woven wire mesh to prevent medium to fine sized floating waste from travelling further into pumping stations or treatment plants. The screen is provided with heavy duty stainless steel sprockets & chain but no sprocket and bearing is installed under the water level.  Filter elements can be replaced individually and quickly during maintenance. These Types of screens are ideal for deep channels and high-water flow. Through flow screen is installed vertically in the channel in a way that the unscreened water enters the screen perforated/mesh panel which is perpendicular to the flow direction. In this screen, water pass through the screen panel twice i.e. once through front panels and then again through same panel travelling at rear side.
Filter mesh / Perforation Size 02 mm to 10 mm Other sizes on request
Filter element width 300 mm to 3500 mm
Shaft center distance (for channel depth) Up to 30,000 mm Higher depth on request
Mode of Operation Motorized.
Mounting Position 90 Degree
Material of Construction Stainless Steel 304, 316 / Duplex / Super Duplex.  Other material on request.
Technical Features Click to open
Drawing & Data Sheet Click to open
SERIES:  B413 – CENTER FLOW TRAVELLING BAND SCREEN
Center flow travelling band screen is a sturdy self-cleaning fine screen provided with endless band of perforated plates or woven wire mesh to prevent medium to fine sized floating waste from travelling further into pumping stations or treatment plants. The screen is provided with heavy duty stainless steel sprockets & chain but no sprocket and bearing is installed under the water level.  Filter elements can be replaced individually and quickly during maintenance. These types of screens are ideal for deep channels and high-water flow.  Center flow screens are installed vertically in the channel in a way that the unscreened water enters the screen inlet located in the middle of the screen frame and is effectively screened as it flows from the inside to the outside through both sides of screens filter element.
Filter mesh / Perforation Size 02 mm to 10 mm Other sizes on request
Filter element width 300 mm to 3500 mm
Shaft center distance (for channel depth) Up to 30,000 mm Larger depth on request
Mode of Operation Motorized.
Mounting Position 90 Degree
Material of Construction Stainless Steel 304, 316 / Duplex / Super Duplex. Other material on request
Technical Features Click to open
Drawing & Data Sheet Click to open
SERIES:  B414 – DUAL FLOW TRAVELLING BAND SCREEN
Dual flow travelling band screen is a sturdy self-cleaning fine screen provided with endless band of perforated plates or woven wire mesh to prevent medium to fine sized floating waste from travelling further into pumping stations or treatment plants. The screen is provided with heavy duty stainless steel sprockets & chain but no sprocket and bearing is installed under the water level.  Filter elements can be replaced individually and quickly during maintenance. These types of screens are ideal for deep channels and high-water flow. Dual flow screen is installed vertically in the channel in a way that the unscreened water enters the screen through the filter elements located on the two sides and flows out from the opening provided at the center of the screen frame. In dual flow design the front opening in the middle of screen frame is closed and the rear opening is open.
Filter mesh / Perforation Size 02 mm to 10 mm Other sizes on request
Filter element width 300 mm to 3500 mm
Shaft center distance (for channel depth) Up to 30,000 mm Larger depth on request
Mode of Operation Motorized.
Mounting Position 90 Degree
Material of Construction Stainless Steel 304, 316 / Duplex / Super Duplex Other material on request
Technical Features Click to open
Drawing & Data Sheet Click to open