STEP SCREENS
SERIES: B311 – SCREENMAT ® ZM (MOTORIZED)
B311--SCREENMATrZM ZM is a geared motor operated Screenmat® Step screen provided with 2 mm thick equally spaced inclined lamellas to prevent fine sized floating waste from travelling further in to the water and waste water treatment plants. The lamella assembly comprises of a fix set of lamellas and a movable set of lamellas installed at an angle of 40 degree and provided with inverse steps so as to promote mat formation. The movable lamellas lift the mat of waste deposited over the screen width and deposit them a step above on the set of fixed lamellas. After depositing the mat of waste on to the fixed lamellas, the movable lamellas go back to its lower home position to start a new operation cycle. This way the mat of waste keeps moving upwards in steps till it reaches the discharge point & further to a waste discharge bin / conveyor. This is a self-cleaning type screen and does not require any external rake arrangement for lifting of waste deposited on screen.
Bar Spacing 02 mm to 06 mm Larger spacing on request
Channel Width 500 mm to 1300 mm. Smaller width on request
Channel Depth Up to 1700 mm.
Mode of Operation Geared Motor
Material of Construction Stainless Steel 304, 316 / Duplex / Super Duplex. Other grades of stainless steel on request.
Technical Features Click to open
Drawing & Data Sheet Click to open
SERIES:  B312 – SCREENMAT ® ZA (HYDRAULIC)
B312-SCREENMATrZA ZA is a hydraulically operated Screenmat® step screen provided with 2 mm thick equally spaced inclined lamellas to prevent fine sized floating waste from travelling further in to the water and waste water treatment plants. The lamella assembly comprises of a fix set of lamellas and a movable set of lamellas installed at an angle of 40 degree and provided with inverse steps so as to promote mat formation. The movable lamellas lift the mat of waste deposited over the screen width and deposit them a step above on the set of fixed lamellas. After depositing the mat of waste on to the fixed lamellas, the movable lamellas go back to its lower home position to start a new operation cycle. This way the mat of waste keeps moving upwards in steps till it reaches the discharge point & further to a waste discharge bin / conveyor. This is a self-cleaning type screen and does not require any external rake arrangement for lifting of waste deposited on screen.
Bar Spacing 02 mm to 06 mm Larger spacing on request
Channel Width 600 mm to 2,000 mm
Channel Depth Up to 2,800 mm.
Mode of Operation Hydraulically through a power pack.
Material of Construction Stainless Steel 304, 316 / Duplex / Super Duplex. Other grades of stainless steel on request.
Technical Features Click to open
Drawing & Data Sheet Click to open